// макса для FormatFloat ffMask = '0.00'; //14.08.2012 '0.000'; // *** Система измерений cMetric_mm = 'mm'; cMetric_sm = 'sm'; cMetric_m = 'm'; cWhitworth_in = '"'; cWhitworth_ft = ''''; // *** cActionNoRealized = 'The command in this version is not realized!'; // Логи ошибок cActiveListNotExistMessage = 'Cannot run action,' + #13#10 + 'page not selected'; CPowerCadMessage = 'Error in PowerCad module: '; // U_Progress cProgress_Mes1 = 'Please wait ...'; cProgress_Mes2 = 'Please wait ...' + #13#10 + 'It may take a while (around 10 min for 100 drops)...'; // U_InterfacesAutoTrace cInterfacesAutoTrace_Mes1 = 'Terminal object doesn''t contain interfaces. ' + #13#10 + 'For autorouting click Autoroute in the right-click menu, ' + #13#10 + 'In components library on proper cable. '; cInterfacesAutoTrace_Mes2 = 'No split interfaces in terminal object. ' + #13#10 + 'Autorouting cannot be done'; // U_EndPoints cEndPoints_Mes1 = 'Object "'; cEndPoints_Mes2 = '" is selected as terminal object'; cEndPoints_Mes3 = '" in unselected as terminal object'; // U_SizePos cSizePos_Mes1 = 'Input data must be numeric'; cSizePos_Mes2 = 'Incorrect data input'; // U_BlockEditor cBlockEditor_Mes1 = 'Clipboard paste error'; cBlockEditor_Mes2 = 'Components library creation folder ...'; cBlockEditor_Mes3 = 'OK'; cBlockEditor_Mes4 = 'Cancel'; cBlockEditor_Mes5 = 'File load error'; // U_Layers cLayers_Mes1 = 'Switch to background layer'; cLayers_Mes2 = 'Switch to main network layer'; cLayers_Mes3 = 'Switch to linear objects caption layer'; cLayers_Mes4 = 'Switch to point objects caption layer'; cLayers_Mes5 = 'Switch to linear objects note layer'; cLayers_Mes6 = 'Switch to point objects note layer'; cLayers_Mes7 = 'Switch to page frame layer'; cLayers_Mes8 = 'Switch to architecture design layer'; cLayers_Mes9 = 'Display/Undisplay'; //cLayers_Mes10 = 'As typical/As substrate layer'; cLayers_Mes10 = 'As typical/As floor plan layer'; cLayers_Mes11 = 'Switch to room layer'; cLayers_Mes12 = 'Layer with this name already exist!'; // U_ChooseComponType cChooseComponType_Mes1 = 'Project scheme'; // U_CadNormsList cCadNormsList_Mes1 = 'No'; cCadNormsList_Mes2 = 'Uncheck for joining'; cCadNormsList_Mes3 = 'Check for joining'; // U_ComponDesignWizard cComponDesignWizard_Mes1 = 'Image must be set'; cComponDesignWizard_Mes2 = 'Error occured when loading components library'; // U_MasterNewList cMasterNewList_Mes1 = 'Page '; cMasterNewList_Mes2 = 'Create project'; cMasterNewList_Mes3 = 'Project options'; cMasterNewList_Mes4 = 'Create page'; cMasterNewList_Mes5 = 'Page options'; cMasterNewList_Mes6 = 'Page'; cMasterNewList_Mes7_1 = 'Apply current settings to new projects'; //'Применять текущие настройки для новых проектов/листов'; cMasterNewList_Mes7_2 = 'Apply current page settings to new projects'; //'Применять текущие настройки для новых листов'; cMasterNewList_Mes8_1 = 'Restore default settings to new projects'; //'Восстановить настройки по умолчанию для новых проектов/листов'; cMasterNewList_Mes8_2 = 'Restore default page settins to new projects'; //'Восстановить настройки по умолчанию для новых листов'; cMasterNewList_Mes9_1 = 'Save current project settings to file'; cMasterNewList_Mes9_2 = 'Load project settings from file'; cMasterNewList_Mes9_3 = 'Save current page settings to existing project settings file'; cMasterNewList_Mes9_4 = 'Load page settings from project settings file'; cMasterNewList_Mes10_1 = 'Save options...'; cMasterNewList_Mes10_2 = 'Open options...'; // U_SCSObjectProp cSCSObjectProp_Mes1 = 'Specified height equals point objects height' +#13#10 + 'Riser will be deleted!'; cSCSObjectProp_Mes2 = 'Delete riser?'; // U_TrunkSCS {$IF Defined (SCS_RF)} cTrunkSCS_Mes1 = '##'; cTrunkSCS_Mes2 = 'mag.'; cTrunkSCS_Mes3 = 'cap.'; cTrunkSCS_Mes4 = 'cab.'; cTrunkSCS_Mes5 = 'tag.'; cTrunkSCS_Mes6 = 'cab.'; cTrunkSCS_Mes7 = 'diam.'; cTrunkSCS_Mes8 = 'cor.'; {$ELSE} cTrunkSCS_Mes1 = '##'; cTrunkSCS_Mes2 = 'mag.'; cTrunkSCS_Mes3 = 'cap.'; cTrunkSCS_Mes4 = 'cab.'; cTrunkSCS_Mes5 = 'tag.'; cTrunkSCS_Mes6 = 'cab.'; cTrunkSCS_Mes7 = 'diam.'; cTrunkSCS_Mes8 = 'cor.'; {$IFEND} cTrunkSCS_Mes9 = 'Connector'; // U_ESCadClasess cCadClasses_Mes1 = 'Route is set on height '; cCadClasses_Mes2 = ' above floor'; cCadClasses_Mes3 = '0 degrees'; cCadClasses_Mes4 = 'Length: '; cCadClasses_Mes5 = ' General length: '; cCadClasses_Mes6 = ' sm'; cCadClasses_Mes7 = ' m'; cCadClasses_Mes8 = ' degrees'; cCadClasses_Mes9 = 'Unable to replace route since it is connected to object.' + 'Disable "Disable connected route replacing" option on bottom toolbar'; cCadClasses_Mes10 = 'Cannot replace WA, since routes are connected to it and' + 'flag "Do not replace connected WA" is set, disable the flag, ' + 'for WA replacement ability'; cCadClasses_Mes11 = 'Cannot connect object, since it has riser'; //Tolik 22/03/2018 -- cCadClasses_Mes11_1 = ' and the option ' + ''''+ 'Use vertical routes' + '''' + ' is not set ' + ''''+ 'ON' + ''''; // cCadClasses_Mes11_2 = 'Can not connect objects, because one of them has raise'; cCadClasses_Mes11_3 = 'Can not connect objects, because both of them have raise or vertical routes'; cCadClasses_Mes11_4 = 'Can not connect object with object !!!'; cCadClasses_Mes11_5 = 'Can not connect connectors, because both of them have raise or vertical routes'; cCadClasses_Mes11_6 = 'Can not connect routes by both ends!'; cCadClasses_Mes11_7 = 'Can not connect object to vertical route, because it has connected raise or vertical routes'; cCadClasses_Mes11_8 = 'Can not connect already connected objects '; cCadClasses_Mes12 = 'Connector'; cCadClasses_Mes13 = 'Object '; cCadClasses_Mes14 = ' loaded incorrectly! Please check it again!'; //Tolik 13/08/2021 -- { cCadClasses_Mes15 = 'Scaling across'; cCadClasses_Mes16 = 'Set across size:'; cCadClasses_Mes17 = 'Scaling across'; cCadClasses_Mes18 = 'Set across size:'; } cCadClasses_Mes15 = 'Horizontal scaling'; cCadClasses_Mes16 = 'Enter the actual horizontal' + #13#10 + 'length of the facility:'; cCadClasses_Mes17 = 'Vertical scaling'; cCadClasses_Mes18 = 'Enter the actual vertical' + #13#10 + 'length of the facility:'; // cCadClasses_Mes19 = 'Edit RTF text ...'; cCadClasses_Mes20 = 'Route'; cCadClasses_Mes21 = 'WA'; cCadClasses_Mes22 = 'List of works will not be created, since it is empty!'; {$IF Defined (SCS_RF)} cCadClasses_Mes23 = 'Units quantity'; {$ELSE} cCadClasses_Mes23 = 'Units quantity'; {$IFEND} cCadClasses_Mes24 = 'Riser peak'; cCadClasses_Mes25 = 'Riser'; cCadClasses_Mes26 = 'Interfloor riser peak'; cCadClasses_Mes27 = 'Interfloor riser'; cCadClasses_Mes28 = 'Editing height'; cCadClasses_Mes29 = 'Enter above floor height'; cCadClasses_Mes30 = 'Trunk riser peak'; cCadClasses_Mes31 = 'Trunk riser'; //cCadClasses_Mes35_1 = 'Creating interfloor lifting'; cCadClasses_Mes35_1 = 'Connecting telecom. device with new floor'; cCadClasses_Mes35_1_1 = 'Creating telecom. device on the new floor'; //cCadClasses_Mes35_2 = 'Select the object to connect with interfloor lifting'; cCadClasses_Mes35_2 = 'Pick the telecom. device to connect' + #13#10 + 'with the newly created floor'; //cCadClasses_Mes35_3 = 'Select the object to create in new page and connect with interfloor lifting'; cCadClasses_Mes35_3 = 'Do you want to create a telecom. device on the new floor?' + #13#10 + 'Pick which one to create or choose another one from Library later'; // U_CAD cCad_Mes1 = 'Background layer'; cCad_Mes2 = 'Network cabling'; cCad_Mes3 = 'Captions to lines'; cCad_Mes4 = 'Captions to objects'; cCad_Mes5 = 'Notes to lines'; cCad_Mes6 = 'Notes to objects'; cCad_Mes7 = 'Page frame'; cCad_Mes8 = 'Architectural design'; cCad_Mes9 = 'Failed to save page'; cCad_Mes10 = 'into database'; cCad_Mes11 = 'Delete selected objects?'; cCad_Mes11_1 = 'Delete only unused risers?'; cCad_Mes12 = 'Delete objects'; cCad_Mes13 = 'Riser height: '; cCad_Mes14 = 'Route section length: '; cCad_Mes14_1 = 'Selected routes length: '; cCad_Mes15 = 'Length to terminal point: '; cCad_Mes16 = 'No selected object in database.'; cCad_Mes17 = ' - Layer: '; cCad_Mes18 = 'You are in main layer now, all objects are' + 'available here'; cCad_Mes19 = 'You are in "background layer" now, creating and ' + 'editing building models is possible'; cCad_Mes20 = 'You are on "Network cabling" layer, you can create and ' + 'edit network schemes'; cCad_Mes21 = 'You proceeded to line captions layer, editing linear type' + 'objects is possible'; cCad_Mes22 = 'You proceeded to connector captions layer, editing point' + 'objects captions is possible'; cCad_Mes23 = 'You proceeded to line notes layer, editing linear type' + 'object notes is possible'; cCad_Mes24 = 'You proceeded to connector notes layer, editing point objects' + 'notes is possible'; cCad_Mes25 = 'You proceeded to page frames layer, editing' + 'page frame is possible'; cCad_Mes26 = 'You proceeded to architectural design layer, drawing' + 'architectural plan is possible'; cCad_Mes27 = 'Terminal object not selected! Conduit/cable was not traced! Select terminal object in context menu, "set as terminal object" item'; cCad_Mes28 = 'Replace on height'; cCad_Mes29 = 'Rooms'; cCad_Mes30 = 'You proceeded to rooms layer, creating and ' + 'editing rooms is possible'; cCad_Mes31 = 'Trunk number: '; cCad_Mes32 = 'Cannot close this list, a link to other lists exist'; // USCS_Main cMain_Mes1 = 'Error message'; cMain_Mes2 = ' (ver.'; cMain_Mes3 = ' of '; cMain_Mes4 = 'Load floor plan'; cMain_Mes5 = 'Network cabling background layers (*.scb)|*.scb'; cMain_MesAllFormats = 'All supported formats|*.jpg;*.jpeg;*.bmp;*.pdf;*.dxf;*.dwg;*.plt;*.svg;*.wmf;*.prn;*.scb;*.png;'; cMain_Mes6 = 'Load from file error'; cMain_Mes7 = 'Save background layer as ...'; cMain_Mes8 = 'Save to file error'; cMain_Mes9 = 'Inaccessible in Trial version!'; cMain_Mes10 = 'Components library is absent!'; cMain_Mes11 = 'Project manager is absent'; cMain_Mes12 = 'Objects properties'; cMain_Mes13 = 'Cannot group theese figures'; cMain_Mes14 = 'Cannot display scale,' + #13#10 + 'page mode is set!'; cMain_Mes15 = 'Error'; cMain_Mes16 = 'Presentation file not found!'; cMain_Mes17 = 'Cannot delete main layer!'; cMain_Mes18 = 'Cannot delete main background layer!'; cMain_Mes19 = 'Cannot delete main network cabling layer!'; cMain_Mes19_1 = 'Cannot delete layer!'; // Tolik 30/08/2019 -- cMain_Mes20 = 'Cannot delete linear network cabling object captions layer!'; cMain_Mes21 = 'Cannot delete point network cabling object captions layer!'; cMain_Mes22 = 'Cannot delete linear network cabling object notes layer!'; cMain_Mes23 = 'Cannot delete point network cabling object notes layer!'; cMain_Mes24 = 'Cannot delete page frames layer!'; cMain_Mes25 = 'Cannot delete architectural design layer!'; cMain_Mes26 = 'Cannot delete connector, since more or less than 2 routes are connected to it' +#13#10 + 'or connector is a riser peak, or object with a riser'; cMain_Mes27 = 'Warning!' + #13#10 + 'Default terminal point not selected' + #13#10 + 'Set it in context menu on object' + #13#10 + '"As terminal object" '; cMain_Mes28 = 'Riser height'; cMain_Mes29 = 'Specify riser height'; cMain_Mes30 = 'Cannot create riser, object height' + 'and riser height are the same'; cMain_Mes31 = 'Cannot create riser, since there are no connected routes. ' + 'Trace at least one route'; cMain_Mes32 = 'Route height'; cMain_Mes33 = 'Indicate route height'; // cMain_Mes34 = 'Tracing for cable connection from all work areas to terminal objects' + #13#10 + // 'will now be performed '; cMain_Mes34 = 'Now the selected cable will be layed out between jacks and a destination: '; // cMain_Mes35 = 'Control of available free ports between connected objects,' + #13#10 + // 'it''s consistancy and connectability'; cMain_Mes35 = 'Connection will be performed if free ports are available on both sides and if they''re compatible'; cMain_Mes36 = 'Autorouting'; cMain_Mes37 = 'Delete selected segment?'; cMain_Mes38 = 'Delete segment'; cMain_Mes39 = 'Delete current plan?'; cMain_Mes40 = 'Delete plan'; cMain_Mes41 = 'Delete selected window/door?'; cMain_Mes42 = 'Delete window/door'; cMain_Mes43 = 'Delete selected column?'; cMain_Mes44 = 'Delete column'; cMain_Mes45 = 'Unable to create interfloor riser, since there is no upper floor.' + #13#10 + 'Create additional page/floor or move current floor down'; cMain_Mes46 = 'Unable to create interfloor riser, since' + #13#10 + 'upper floor is not typical' + #13#10 + 'and it does not fit for interfloor riser creation'; cMain_Mes47 = 'Unable to create interfloor riser, since lower floor does not exist.' + #13#10 + 'Create additional page/floor or move current floor up'; cMain_Mes48 = 'Unable to create interfloor riser down, since' + #13#10 + 'lower floor is not typical' + #13#10 + 'and it does not fit for interfloor riser'; // Tolik 13/05/2017 -- cMain_Mes48_1 = 'Delete all components?'; cMain_Mes48_2 = 'Removing components'; // {$IF Defined(SCS_PANDUIT)} cMain_Mes49 = 'Exit?'; {$ELSE} cMain_Mes49 = 'Exit CableProject CAD?'; {$IFEND} cMain_Mes50 = 'Exit program'; cMain_Mes51 = 'Paste graphic symbol ...'; cMain_Mes52 = 'Network cabling components library (*.blk)|*.blk'; cMain_Mes53 = 'File name not found.'; cMain_Mes54 = 'Unknown'; cMain_Mes55 = 'This point object is not connected!'; cMain_Mes56 = 'Save page as BMP ...'; cMain_Mes57 = 'Image (*.bmp)|*.bmp'; cMain_Mes58 = 'Changes history file not found!'; cMain_Mes59 = 'Segment width'; cMain_Mes60 = 'Set segment width'; cMain_Mes61 = 'Segments width'; cMain_Mes62 = 'Set width for all segments'; cMain_Mes63 = 'Window/door size'; cMain_Mes64 = 'Set window/door size'; cMain_Mes65 = 'Column angle'; cMain_Mes66 = 'Set column angle in degrees'; cMain_Mes67 = 'Column height'; cMain_Mes68 = 'Set column height'; cMain_Mes69 = 'Column width'; cMain_Mes70 = 'Set column width'; cMain_Mes71 = 'Segment lines thikness'; cMain_Mes72 = 'Set segment lines width (1-7):'; cMain_Mes73 = 'Line width must be within 1-7!'; cMain_Mes74 = 'Incorrect data format!'; cMain_Mes75 = 'When line width extends 1 install another route style' + #13#10 + 'except solid one is impossible!'; cMain_Mes76 = 'Set segment lines style (0-5):' + #13#10 + '0 - solid' + #13#10 + '1 - bar' + #13#10 + '2 - dotted' + #13#10 + '3 - dashdot' + #13#10 + '4 - bar double dotted' + #13#10 + '5 - transparent'; cMain_Mes77 = 'Segment lines style'; cMain_Mes78 = 'Line style must be within 0-5!'; cMain_Mes79 = 'All segment lines width'; cMain_Mes80 = 'Set all segments lines width (1-7):'; cMain_Mes81 = 'Load page frame ...'; cMain_Mes82 = 'Network cabling page frames (*.sch)|*.sch'; cMain_Mes83 = 'Save page frame as ...'; cMain_Mes84 = 'Save architectural plan as ...'; cMain_Mes85 = 'Network cabling architectural plans (*.sca)|*.sca'; cMain_Mes86 = 'Load architectural plan ...'; cMain_Mes87 = 'Manual file not found!'; cMain_Mes88 = 'Caption height'; cMain_Mes89 = 'Set caption height in pixels'; cMain_Mes90 = 'Caption thickness'; cMain_Mes91 = 'Set caption width in pixels'; cMain_Mes92 = 'Save components library ...'; cMain_Mes93 = 'Indicate riser height'; cMain_Mes94 = 'Indicated height equals interfloor riser height' +#13#10 + 'Interfloor riser will be deleted!'; cMain_Mes95 = 'Delete intefloor riser?'; cMain_Mes96 = 'Project plan page already exists!'; cMain_Mes97 = 'Save page as WMF ...'; cMain_Mes98 = 'Image (*.wmf)|*.wmf'; cMain_Mes99 = 'Select for autorouting'; cMain_Mes100 = 'Unselect for autorouting'; cMain_Mes101 = 'Unable to create interfloor riser, since' + #13#10 + 'next floor is of different network type' + #13#10 + 'and it does not fit for interfloor riser creation'; cMain_Mes102 = 'Unable to create interfloor riser, since' + #13#10 + 'next floor is of different network type' + #13#10 + 'and it does not fit for interfloor riser creation'; cMain_Mes103 = 'Cannot delete room layers!'; cMain_Mes104 = 'Horiz. scale'; cMain_Mes105 = 'Vert. scale'; // //cMain_Mes106 = 'Room'; //cMain_Mes107 = 'Floor plan'; //'Arch. plan'; //cMain_Mes108 = 'Segment'; cMain_Mes106 = 'Rect.Area'; cMain_Mes107 = 'Room'; //'Arch. plan'; cMain_Mes108 = 'Wall'; //cMain_Mes109 = 'Route r/a'; //cMain_Mes109 = 'Route ortho'; cMain_Mes109 = 'Ortho route'; cMain_Mes110 = 'Route'; cMain_Mes111 = 'Full screen'; cMain_Mes112 = 'Select to disable autorouting'; cMain_Mes113 = 'Unselect to disable autorouting'; cMain_Mes114 = 'House'; cMain_Mes115 = 'Are you sure delete House?'; cMain_Mes116 = 'Delete House'; //cMain_Mes117 = 'Complex Room'; cMain_Mes117 = 'Polygonal Area'; cMain_Mes118 = 'Pan'; cMain_Mes120 = 'Open vector drawing ...'; cMain_Mes121 = 'Open raster drawing ...'; cMain_Mes122 = 'Save as vector drawing ...'; cMain_Mes123 = 'Save as raster drawing ...'; cMain_Mes124 = 'Vector drawings |*.dxf; *.dwg; *.svg; *.prn; *.plt; *.wmf;|' + 'DXF files |*.dxf|' + 'DWG files |*.dwg|' + 'SVG files |*.svg|' + 'PRN files |*.prn|' + 'PLT files |*.plt|' + 'WMF files |*.wmf'; cMain_Mes124_2 = 'DXF files |*.dxf|' + 'DWG files |*.dwg|' + 'WMF files |*.wmf'; // cMain_Mes124_2 = 'DXF files |*.dxf|' + // 'DWG files |*.dwg|'; cMain_Mes125 = 'Raster drawings |*.bmp; *.jpg; *.jpeg;|' + 'BMP files |*.bmp|' + 'JPG files |*.jpg|' + 'JPEG files |*.jpeg'; //Tolik 10/08/2021 -- to load PNG Background cMain_Mes125_ = 'Raster drawings |*.bmp; *.jpg; *.jpeg; *.png;|' + 'BMP files |*.bmp|' + 'JPG files |*.jpg|' + 'JPEG files |*.jpeg|' + 'PNG files |*.png'; // cMain_Mes126 = 'Vertical route height';//'Высота вертикальной трассы'; //cMain_Mes128 = 'Failed to create'; cMain_Mes138 = 'Set as destination object for cables? Cables from outlets will be layed out down to this object.'; cMain_Mes139 = 'Create interfloor riser?'; cMain_Mes140 = 'Proceed placing more outlets on the drawing in one click?'; cMain_Mes141 = 'Input outlet label'; // U_Common cCommon_Mes1 = '" was connected to object"'; cCommon_Mes2 = 'Autorouting has been made with "'; cCommon_Mes3 = '" to terminal object"'; cCommon_Mes4 = 'From object"'; cCommon_Mes5 = '" to terminal objects, autorouting not conducted!'; cCommon_Mes6 = 'Possible reasons: ' + #13#10 + '1. Interfaces mismatch, or neccessary interfaces absence' + #13#10 + '2. No routes between selected objects'; cCommon_Mes7 = ' - Layer: '; cCommon_Mes8 = 'Cannot create page, must create project first!'; cCommon_Mes9 = 'Open page error'; cCommon_Mes10 = ' project'; cCommon_Mes11 = 'One of columns is not entered!'; cCommon_Mes12 = 'An error occured when loading image'; cCommon_Mes13 = 'AV when updating page!'; cCommon_Mes14 = 'Warning! There are interfloor risers on replaceable pages.' + #13#10 + 'Replacing of this pages will entail deleting all interfloor risers on these pages' + #13#10 + 'Replace pages?'; cCommon_Mes15 = 'Pages replacement'; cCommon_Mes16 = 'Trace '; cCommon_Mes17 = ' cables?'; cCommon_Mes18 = 'No - trace only one cable.'; cCommon_Mes19 = 'Cable connection'; cCommon_Mes20 = 'Lay out through risers?'; cCommon_Mes21 = 'Cable tracing!'; cCommon_Mes22 = 'Grouped objects cannot be duplicated!'; cCommon_Mes23 = 'Room drop-ceiling height'; cCommon_Mes24 = 'Enter drop-ceiling height:'; // 21.01.2008 cMasterNewList_Mes11 = 'To continue, please, select designed network type'; cMasterNewList_Mes12 = 'Grid spacing (0.1 - 5)'; cMasterNewList_Mes13 = 'Grid spacing (0.1 - 5)'; //16.05.2008 cMasterNewList_Mes14 = 'Warning'; {$IF Defined (SCS_RF)} cCadNormsProp_Mes1 = '"##"'; cCadNormsProp_Mes2 = '"Works name"'; cCadNormsProp_Mes3 = '"Unit of measure"'; cCadNormsProp_Mes4 = '"Quantity"'; cCadNormsProp_Mes5 = '"Units quantity"'; {$ELSE} cCadNormsProp_Mes1 = '"##"'; cCadNormsProp_Mes2 = '"Works name"'; cCadNormsProp_Mes3 = '"Unit of measure"'; cCadNormsProp_Mes4 = '"Quantity"'; cCadNormsProp_Mes5 = '"Units quantity"'; {$IFEND} cCadNormsProp_Mes6 = 'Column width '; cImport_Mes4 = 'DXF files import'; // cImport_Mes5 = 'DXF, DWG, SVG, PRN, PLT files (*.dxf, *.dwg, *.svg, *.prn, *.plt)|*.dxf; *.dwg; *.svg, *.prn, *.plt'; cImport_Mes5 = 'All supported formats |*.dxf; *.dwg; *.svg; *.prn; *.plt;|' + 'DXF files |*.dxf|' + 'DWG files |*.dwg|' + 'SVG files |*.svg|' + 'PRN files |*.prn|' + 'PLT files |*.plt'; cImport_Mes6 = 'HEADER section not read'; cImport_Mes7 = 'CLASSES section not read'; cImport_Mes8 = 'TABLES section not read'; cImport_Mes9 = 'BLOCKS section not read'; cImport_Mes10 = 'ENTITIES section not read'; cImport_Mes11 = 'OBJECTS section not read'; cImport_Mes12 = 'DXF files (*.dxf)|*.dxf'; cImport_Mes12_2 = 'DWG files (*.dwg)|*.dwg'; cExport_Mes1 = 'DXF files export'; cExport_Mes2 = 'DWG files export'; cPrevForm_Mes1 = 'Selected printer: '; cDrawObjects_Mes1 = 'Circle radius'; cDrawObjects_Mes2 = 'Enter circle radius in pixels:'; cDrawObjects_Mes3 = 'Entered data is not a numeric!'; cDrawObjects_Mes4 = 'Slotted line'; cDrawObjects_Mes5 = 'Enter new text:'; cDrawObjects_Mes6 = 'Enter text'; cDrawObjects_Mes7 = 'Text'; cDrawObjects_Mes8 = 'RTF text editing ...'; cDrawObjects_Mes9 = 'Mathematical diagram'; cDrawObjects_Mes10 = 'Enter function:'; cDrawObjects_Mes11 = 'Text panel'; cDrawObjects_Mes12 = 'Enter text:'; cLoadColor_Mes1 = 'No '; cLoadColor_Mes2 = 'By default'; cLoadColor_Mes3 = 'Other colors'; cImport_Mes1 = 'Unable to open a file'; cImport_Mes2 = 'Image scaling'; //Tolik -- 23/07/2021 -- //cImport_Mes3 = 'Run scaling page relatively?'; cImport_Mes3 = 'Fit image to page size?'; // // ********** cDpr_Mes1 = 'Error while copying function library!'; cDpr_Mes2 = 'Date format changing error!'; //Panduit Network CAD {$IF Defined(SCS_PANDUIT)} cDpr_Mes3 = '\Panduit Network CAD trial.lnk'; cDpr_Mes4 = '\Programs\Panduit Network CAD\Panduit Network CAD trial.lnk'; cDpr_Mes5 = '\Programs\Panduit Network CAD\Panduit Network CAD trial.lnk'; {$ELSE} cDpr_Mes3 = '\Cable Project trial.lnk'; cDpr_Mes4 = '\Programs\CableProject\Cable Project trial.lnk'; cDpr_Mes5 = '\Programs\CableProject\Cable Project trial.lnk'; {$IFEND} cMasterNewList_Mes15 = 'Because of point components indexing way change, the forced re-indexing of all point components with would be applied'; cMasterNewList_Mes16 = 'Because of components tagging mode change, the forced retagging of all components would be applied'; cMasterNewList_Mes17 = 'Continue'; //--------------------------------------------------------------------------------------------------------------- //---------------------------- Все что ниже, нуждается в переводе ----------------------------------------------- //--------------------------------------------------------------------------------------------------------------- cExportDXF_Mes1 = 'Export to DXF'; cExportDXF_Mes2 = 'Include Z coordinate when exporting to DXF'; cForm3D_Mes1 = 'Save 3D ...'; cForm3D_Mes2 = 'Warning! Saving perspective view will be incorrect. ' +#13#10 + 'Switch to orthogonal view'; cForm3D_Mes3 = 'Current mode: Perspective'; cForm3D_Mes4 = 'Current mode: Orthogonal'; cHouse_Mes1 = 'Approach in out of House bounds'; cHouse_Mes2 = 'Approach'; cMasterNewListLite_Mes1 = 'Next >>'; cMasterNewListLite_Mes2 = 'Done'; cMasterNewListLite_Mes3 = 'Load to list ...'; cMasterNewListLite_Mes4 = 'All formats |*.dxf; *.dwg; *.svg; *.prn; *.plt; *.wmf; *.bmp; *.jpg; *.jpeg; *.scb; *.sca|' + 'DXF files |*.dxf|' + 'DWG files |*.dwg|' + 'SVG files |*.svg|' + 'PRN files |*.prn|' + 'PLT files |*.plt|' + 'WMF files |*.wmf|' + 'BMP files |*.bmp|' + 'JPG files |*.jpg|' + 'JPEG files |*.jpeg|' + 'SCB files |*.scb|' + 'SCA files |*.sca'; cMasterNewListLite_Mes5 = 'Create project wizard'; cMasterNewListLite_Mes6 = 'Create list wizard'; //--------------------------------------------------------------------------------------------------------------- //---------------------------- Все что ниже, нуждается в переводе ----------------------------------------------- //--------------------------------------------------------------------------------------------------------------- cPrnScaleToPaper = 'Page fit'; cCommon_Mes14_2 = 'Note that pages contain risers. ' + #13#10 + 'Moving pages will erase riser. Ok?'; cCadClasses_Mes32 = 'Vertical route';//'Вертикальная трасса'; cCadClasses_Mes33 = 'Raduis'; cCadClasses_Mes34 = 'Distance'; cMain_Mes13_1 = 'Cannot ungroup these shapes'; cMain_Mes127 = 'Specify the vertical route height'; cMain_Mes128 = 'Cannot create the vertical route for ' + ' the object height matches the route height'; cMain_Mes129 = 'Input number of corners'; cMain_Mes130 = 'Input the corder'; cMain_Mes131 = 'already exists. Replace the file?'; cMain_Mes132 = 'No lines are selected to create the route'; cMain_Mes133 = 'Delete original lines? '; cMain_Mes134 = 'Undo will be impossible. Continue?'; cMain_Mes135 = 'Exterior niches will not affect the the front face area'; // Ниши с внешней стороны не будут учтены на расчете площади фасада cForm3D_Mes5 = 'First Person View'; // Текущий вид: От первого лица cForm3D_Mes6_1 = 'Save changes?'; cForm3D_Mes6_2 = 'Saving changes'; cForm3D_Mes6_3 = 'Apply cut?'; // применить разрезку? cMasterNewList_Mes18 = 'Page margins'; cMasterNewListLite_Mes7 = 'Set currency in extended mode?';//'Задать валюту можно в расширенном режиме. Перейти на него?'; cDrawObjects_Mes13_1 = 'Line'; cDrawObjects_Mes13_2 = 'Specify line legth'; cDrawObjects_Mes14 = 'Triangle dimensions'; cDrawObjects_Mes15_1 = 'Arc radius'; cDrawObjects_Mes15_2 = 'Input arc radius:'; cDrawObjects_Mes16 = 'Sector parameters '; cForm3D_Mes7_1 = 'Rooms'; cForm3D_Mes7_2 = 'Doors'; // 2 cForm3D_Mes7_3 = 'Windows'; // 3 cForm3D_Mes7_4 = 'Balconies'; // 4 cForm3D_Mes7_5 = 'Slopes'; // 5 cForm3D_Mes7_6 = 'Archs'; // 6 cForm3D_Mes7_7 = 'Niche'; // 7 cForm3D_Mes7_8 = 'Floors'; // 8 cForm3D_Mes7_9 = 'Ceiling'; // 9 cForm3D_Mes7_10 = 'Inner slopes'; // 10 cForm3D_Mes7_11 = 'Outer slopes'; // 11 //cForm3D_Mes9 = '3D model'; cForm3D_Mes7_12 = '3ds objects'; // 12 cForm3D_Mes8_1 = 'Objects'; cForm3D_Mes8_2 = 'Routes'; cForm3D_Mes8_3 = 'Lifts'; cForm3D_Mes8_4 = 'Lifts'; //Tolik 09/05/2018 -- //cForm3D_Mes10 = 'All substrates'; cForm3D_Mes10 = 'All floor plans'; //cForm3D_Mes11 = 'Substrates'; cForm3D_Mes11 = 'Floor plans'; //cForm3D_Mes12 = 'Substrates transparency'; cForm3D_Mes12 = 'Floor plans transparency'; cForm3D_Mes13 = 'Scales of pages (floors) are different. ' + #13#10 + 'To view the entire project 3D model scales of pages should be equal.' + #13#10 + 'But anyway you can open a single page in 3D mode.'; // cModel = '3D Model'; cRoom = 'Room '; cWall = 'Wall '; cDoor = 'Doorway '; cWindow = 'Windowway '; cBalcon = 'Balconyway '; cNiche = 'Niche '; cArc = 'Arch '; cInnerSlope = 'Slope'; cOuterSlope = 'Outer slope'; cSide = 'Face'; cFloor = 'Floor'; cCeiling = 'Ceiling'; cSubSide = 'Subfaces'; cImport_Mes13 = 'When importing found graphics, check the availability of the source file in the model'; //Tolik cImport_Mes14_1 = 'Image import'; cImport_Mes14 = 'Attention! Too many graphical primitives. ' + #13#10'Convert to raster image?'; cImport_Mes15 = 'Select Image scale'; //cImport_Mes16 = 'Attention! There is no ability to correctly load all the graphical primitives.' + #13#10'Convert to raster image?'; cImport_Mes16 = 'Warning! Impossible to correctly load all the graphical primitives.' + #13#10'Convert to raster image?'; // cDXFEngineSCS_Msg1 = 'Untitled'; cCommon_Mes25 = 'The layout of the equipment in the control room'; cCommon_Mes25_ukr = 'The layout of the equipment in the control room'; cCommon_Mes26 = 'The layout of the project objects'; cCommon_Mes26_ukr = 'The layout of the project objects'; //cCommon_Mes27_1 = 'Select method of layout routes'; // or "select way..." //cCommon_Mes27_2 = 'Serial layout routes (like a tree topology)'; //cCommon_Mes27_3 = 'Parallel layout routes (like a star topology)'; cCommon_Mes27_1 = 'Select routes lay out method'; //08.07.2013 cCommon_Mes27_2 = 'Connect outlets one after another (like a tree topology)'; //08.07.2013 cCommon_Mes27_3 = 'Сonnect each outlet separately (like a star topology)'; cCommon_Mes27_2 = 'Each cable in available conduit or trunking route'; cCommon_Mes27_3 = 'Each cable on it own route (ceiling or underfloor etc)'; cCommon_Mes27_4 = 'Lay out routes to main route'; cCommon_Mes28_1 = 'cables to WA'; cCommon_Mes28_2 = 'cables btw Box and Rack'; // Tolik cCommon_Mes29 = 'Attention!'; cCommon_Mes30 = 'You are on the background Layer!'+#13#10+'Font settings will be applied to all the text objects of Background Layer.' //+#13#10+'It will be impossible to undo changes to the font properties on the substrate!' // Tolik 16/10/2020 -- +#13#10+'It will be impossible to undo changes to the font properties on the floor plan!' // Tolik 16/10/2020 -- +#13#10+'Apply the page settings?'; // cCommon_Mes31 = '!!! Incorrect data in the project manager, we try to restore the data'; cCommon_Mes32 = '!!!!!! Failed to restore all data. Contact the developer!'; cCommon_Mes33 = 'Data in the project manager has been successfully restored.'; cCommon_Mes34 = 'Attention! It is not possible to recover incorrect data in the project manager. Contact the developer!'; // Tolik 10/05/2018 -- cCommon_Mes35 = 'Cables were not connected due to lack of free ports' + #13#10 + 'in Outlets or Boxes or Patch-panels in Telecom Cabinets' + #13#10 + 'Please add Outlets/Boxes/Patch-panels etc.' + #13#10 + #13#10 + 'Run cables anyway?'; // cPDFView_Msg1 = 'Activate'; cPDFView_Msg2 = 'Deactivate'; cPDFView_Msg3 = 'Opening PDF document'; cPDFView_Msg4_1 = 'Wrong Password!'; //'Wrong Password!' cPDFView_Msg4_2 = 'Enter the password again.'; //'Enter the password again.': cPDFView_Msg4_3 = 'Please open the document again.'; //'Please open the document again.' cPDFView_Msg4_4 = 'Enter Password'; // Enter Password cPDFView_Msg4_5 = 'This is a Password protected file. Please enter the password:'; // This is a Password protected file. Please enter the password: //cMain_Mes136 = 'Select sheet document for the substrate...'; cMain_Mes136 = 'Select page...'; cMain_Mes137 = 'Interactive training control buttons!'; //'Interactive Next button!'; cMain_Mes137_2 = 'After click Next button!'; //Tolik 23/09/2021 -- //cCadClasses_Mes36 = 'The route was not connected'; cCadClasses_Mes36 = 'The route is not connected to any object yet (outlets, rack, panel etc.)'; // cMain_Mes142 = 'Need update template of report!'; cMain_Mes143_c = 'Export to PDF'; cMain_Mes143 = 'Consider the scale on sheets when exporting?'; //Tolik 04/05/2018 -- cMain_Mes144 = 'Current page will be placed on ' + #13#10 + ' the zero level'; cMain_Mes145 = 'Please click to create the Interfloor Riser'; // Tolik 10/05/2018 -- cPresentation_err1 = 'Error load presentation module'; cWarningMess = 'Attention '; cDescriptionMess = 'Description'; cImageMess = 'Image'; cCadMess1 = 'There is no ability to connect objects, because can not covert betweenfloor raise to vertical route'; cCadMess2 = 'There is no ability to connect objects, because can not covert magistral route to vertical route'; // // Tolik 03/08/2018 -- CantConnMess1 = 'Route between'; CantConnMess2 = ' and '; CantConnMess3 = ' was not layed, because of they are connected by another routes!'; CantConnMess4 = ' was not layed, because the program option USE VERTICAL ROUTES is turned off!'; // // Tolik 03/09/2018 -- for 3D _3DRoomName = 'Room '; _3DWallName = 'Wall '; _3DSlopeName = 'Slope '; _3DCornerName = 'Corner for '; _3DWindowName = 'Window '; _3DDoorName = 'Door '; _3DPmMenuName4 = 'Show/Hide'; SetAngleHMsg = 'Set the corner height '; IncorrInpVal = 'Incorrect data input'; SetWndH = 'Set the window height'; SetDoorH = 'Set the door height'; SetWinPLHMsg = 'Set the window placement height'; SetDoorPLHMsg = 'Set the door placement height'; SetListWndH = 'Set the windows height'; SetListDoorH = 'Set the doors height'; SetListWinPLHMsg = 'Set the windows placement height'; SetListDoorPLHMsg = 'Set the doors placement height'; _3DNotSetSideSection = 'Not set side section or out diameter for '; // // Tolik 10/02/2021 -- c_ELMes1 = 'Single-line electrical diagram'; //Tolik 21/01/2021 -- // *** Система измерений fMetric_mm = 'mm'; fMetric_sm = 'sm'; fMetric_m = 'm'; fWhitworth_in = 'inch'; fWhitworth_ft = 'feet'; //